| |
| By Department |
| |
Trailer
|
| By Category |
| |
Trailer Lights
|
| By SubCategory |
| |
Trailer Light Connectors
|
| |
|
| |
|
| By Brand |
| |
Cole Hersee
|
| |
|
|
|
|
|
| Search Results |
Total Items: 88 |
|
| |
|
|
Cole Hersee - 4-Pole Trailer Connecter
|
| The Cole Hersee 11134BP 4-Pole Trailer Connector Plug and Socket, with 6" Wires. |
- Universal trailer connector
- Molded weatherproof bodies
- Color-coded 16AWG wires
- Conductors are aligned and bonded
|
|
|
Cole Hersee - 2-Pole Trailer Connector
|
| The Cole Hersee 11172BP 2-Pole Trailer with 6" wire leads. |
- Polarized to assure correct mating
- 6" long 16AWG wire leads
|
|
|
Cole Hersee - Continuous Duty Solenoid 12V 85A
|
| The Cole Hersee 24059BP Continuous Duty Solenoid has a continuous rating of 85 amps at 12 VDC. |
- Bracket mounting holes 5/16" x 19/32"
- 2-13/64" on centers
- Steel housing
|
|
|
Cole Hersee - Continuous Duty Solenoid 24V 85A
|
| The Cole Hersee 24063 Continuous Duty Solenoid has a continuous rating of 85 amps at 24 VDC. |
- Bracket mounting holes 5/16" x 19/32"
- 2-13/64" on centers
- Steel housing
|
|
|
Cole Hersee - Reversing Solenoid 12V
|
| The Cole Hersee 24450 Reversing Solenoid is useful for control of reversing motors such as hoists, winches, windlasses and snowplow blades. |
- Reversing
- Two solenoids in one
|
|
|
Cole Hersee - Universal Lamp Socket
|
| The Cole Hersee 26100BP Universal Lamp Socket is made of corrosion resistant plated brass. Terminal insulators are molded plastic. |
- Brass socket
- Double contact
- Molde plastic insulator
- 8" wire leads
|
|
|
Cole Hersee - In-Line Fuse Holder
|
| The Cole Hersee 30310BP In-Line Fuse Holder protects electrical circuits and equipment from fires caused by shorts and overloads. |
- Larges brass contacts
- Heavy #14 gague wire, 8" long
- Positive twist-lock
- SFE fuses through 20A, AGC fuses through 30A
- Fuse not included
|
|
|
Cole Hersee - Replacement Rubber Cap - Momentary Switches
|
| The Cole Hersee 407-03 black rubber cap is a replacement cap for momentary switches. For moisture and dirt protection. |
- Fit over special face nut supplied with switches
|
|
|
Cole Hersee - Universal Buzzer
|
| The Cole Hersee 4099 Universal Buzzer is used for bus "door open" warning, bus operator signal, low air pressure warning, etc. |
- Electrical contacts designed for instant response
- Impact resistant ABS resin
- Moisture repellent insulator
- Two screw terminals with lockwashers
- For 12VDC electrical systems
|
|
|
Cole Hersee - Dual Alarm Engine Warning 12V
|
| The Cole Hersee 4112RC combines warning light and buzzer for two way warning of hazardous conditions. |
- Applications: low air, oil, vacuum, engine temp., door ajar, hoise or dump body, camper to cab signal
- For 12VDC electrical systems
- Red lens snaps out for easy bulb replacement
- Bulb included
- Wiring diagram included
|
|
CHR4124RD Dual Alarm Engine Warning 24V
|
|
|
Cole Hersee - Heavy Duty Battery Feeder Stud
|
| The Cole Hersee 46211-01 Heavy Duty Batter Feeder Stud brings 6-36 VDC power through firewalls and bulkheads. |
- Impact resistant plastic insulator mounting/bushing, 1-17/64" dia. 5/8" long
- Two 3/8"-16 thread brass stud terminals, 5/8" long
|
|
|
Cole Hersee - 6 Position Circuit Breaker/Fuse Block
|
| The Cole Hersee 46377-6 Circuit Breaker and Fuse Block is for ATC or ATO fuses or plug-in circuit breakers. |
- 25A max per circuit at 12 VDC
- 150A total for block at 12 VDC
- For 24 VDC applications use only ATC or ATO fuses
- .25" wide blade terminals
- #10-32 with hex nut sutd terminals, flat washer and lock washer supplied
|
|
|
Cole Hersee - Weather Resistant Toggle Switch - 2 Blade Terminal
|
| The Cole Hersee 54100-01 SPST Toggle Switch has weather resistant black plastic housing and two blade terminals. |
- 25A at 12 VDC
- 15/32"-32 thread, 15/32" long
- Up to 1/8" panel thickness
- Two blade terminals
- Silver contacts
|
|
|
Cole Hersee - Weather Resistant Toggle Switch - 2 Screw Terminal
|
| The Cole Hersee 54100 SPST Toggle Switch has weather resistant black plastic housing and two screw terminals. |
- 25A at 12 VDC
- 15/32"-32 thread, 15/32" long
- Up to 1/8" panel thickness
- Two screw terminals
- Silver contacts
|
|
|
Cole Hersee - Illuminated Toggle Switch - 4 Screw Terminal
|
| The Cole Hersee 54109 Illuminated SPST Toggle Switch has weather resistant black plastic housing and four screw terminals. |
- 25A at 12 VDC
- 15/32"-32 thread, 15/32" long
- Up to 1/8" panel thickness
- Four screw terminals
- Illuminated
|
|
|
Cole Hersee - Illuminated Toggle Switch - 5 Blade Terminal
|
| The Cole Hersee 54110-01 Illuminated SPDT Toggle Switch has weather resistant black plastic housing and five blade terminals. |
- 25A at 12 VDC
- 15/32"-32 thread, 15/32" long
- Up to 1/8" panel thickness
- Five blade terminals
- Illuminated
|
|
| |
| |
|
