Login My Account
0
$0.00
HACKER SAFE certified sites prevent over 99.9% of hacker crime.

 
 
By Department
  Paint
By Category
  Antifouling
  Fairing & Filler
  Primer & Sealer
  Solvents
  Topside
  Undercoats
By SubCategory
  Barrier Coat Primer
  Boatyard Paint
  Copolymer Paint
  Epoxy Based Undercoat Paints
  Epoxy Paint
  Epoxy Putty
  Epoxy Sealer
  Metal Primer
  Mineral Base Paint
  Mineral Base Solvent
  Mineral Based Undercoat Paints
  Non-Skid Compound
  Paint Remover Solvent
  Polyester Putty
  Topside Enamel Paints
  Topside Urethane Paints - 1 Part
  Topside Varnish
  Water Based Paint
   
   
By Brand
  System Three Resins

Pettit Paint

Tempo

BlueWater Paint

   
Search Results Total Items: 16  
Page 1  

BlueWater Paint - 8000A/B High Build Epoxy Primer
A clear high build epoxy primer for use with gel coat and fiberglass laminate. Boatlife 8000A is the primer, which is mixed with Boatlife 8000B, the activator (also supplied).
  • Provides a seamless high build epoxy coating
  • Creates an impermeable water barrier
  • Eliminates any direct path for water migration
  • No harmful methylene chloride, and has superior sag control resistance
  • An excellent primer for all underwater metal hulls and keels

BlueWater Paint - 8001A/B High Build Epoxy Sealer
A clear high build epoxy sealer for use when gel coat and fiberglass laminate requires sealing. Boatlife 8001A is the primer, which is mixed with Boatlife 8001B, the activator (also supplied).
  • 100% solids, no solvents can be trapped behind the epoxy
  • Used in conjunction with Bottom Protect 8000 High Build Epoxy Primer

Pettit Paint - 2018 Clear Sealer - Gallon
This is a phenolic resin-based sealer used for printing all types of raw wood prior to painting. The sealer acts as a moisture barrier layer to prevent peeling and excessive absorption of vehicle from undercoaters or vanishes by the new wood.
  • Excellent penetration into raw wood for improved stability
  • Prevents excessive absorption of vehicle from undercoaters or varnishes
  • Applies easily by brush or spray
PET20184 2018 Clear Sealer - Quart

Pettit Paint - 4700/4701-1 Pettit Protect Epoxy Primer - Gallon
Pettit Protect High Build Epoxy Primer 4700/4701 is a heavy-duty, high build, two component epoxy-polyamide coating for use where maximum resistance to fresh or salt water is required.
  • Reduces water absorption in fiberglass hulls and prevents osmotic blistering
  • High film build for maximum protection with fewer coats
  • Excellent water and chemical resistance
  • Exceptional protection for steel, aluminum and other metals

Pettit Paint - 6455/044 Metal Primer Pack - Gallon
6455 Metal Primer is a self-etching type wash primer for use only on bare metals such as steel, stainless steel, cast iron, copper, bronze, galvanized steel, lead and aluminum.
  • Forms excellent adhesive bond to most bare metals
  • For use above and below the waterline
  • Recommended for all underwater metals and running gear
PET64554 6455/044 Metal Primer Pack - Quart

Pettit Paint - 6980 Rustlok Steel Primer - Gallon
Pettit 6980 Rustlok Steel Primer is a one package moisture cured polyurethane coating designed for application over any steel or cast iron surface, including galvanized and stainless steel.
  • Forms dense, water impervious barrier
  • Excellent corrosion protection
PET69804 6980 Rustlok Steel Primer - Quart

System Three Resins - Rot Fix 24 oz.Kit
The System Three SYS1500K40 Rot Fix penetrates deep into deteriorated and rotted wood, creating a strong, solid base for restoration.
  • Working Time @ 25ᄚ C.=30 min.
  • Cure Time @ 25ᄚ C.=2 Hours
  • Mix Ratio 2:1
  • After Rot Fix application, a patch or recreated portion may be built up with System Three Sculptwood
  • With Rot Fix and Sculpwood together, they make a high quality, permanent , wood restoration system.
SYS1500K42 Rot Fix 1.5 Quart Kit
SYS1500K44 Rot Fix 3 Quart Kit
SYS1500K46 Rot Fix 1.5 Gallon Kit
SYS1500K52 Rot Fix 3 Gallon Kit

Tempo - 6WTA12 Pickup Tube - 12"
Withdrawal assembly, aluminum tank.

Tempo - 13-1 High Temperature Paint - White
Tempo White exhaust / manifold high temperature paint is forumalated to resist temperattures up to 1500 degrees Fahrenheit.
  • Forms a hard, lasting finish
  • Will not burn off, chip or peel
  • Ideal for use on headers, exhaust manifolds, surfaces in high heat
  • Not for use on water cooled components
  • Self-priming finish
TEM015132 13-2 High Temperature Paint - Black

Tempo - 203 Engine Enamel - Phantom Black 12 oz.
Tempo Phantom Black engine enamel dries to an extemely rugged, high heat-resistant finish. Repeated exposure to to engine heat will fuse enamel to surface.
  • Fully resistant to oil and gasoline
  • Can be coated at any time
  • Fast drying formula
  • All inboard, generator and diesel applications
  • Fuses to engine surface
TEM015211 211 Engine Enamel - Hot Rod White 12 oz.
TEM015225 225 Engine Enamel - GM Green (1977+)
TEM020340 11-26 Engine Enamel - Chrysler Blue (1976-82)
TEM020360 213 Engine Enamel Caterpillar Yellow
TEM020370 213 Engine Enamel New Caterpillar Yellow
TEM020472 6972 Engine Enamel - Diesel Red
TEM020473 6973 Engine Enamel - Volvo Green
TEM020478 6978 Engine Enamel - Charcoal Non-Metallic (1986+)
TEM020491 6991 Engine Enamel - Crusader Blue

Tempo - 7-3000 Sandable Primer - Red Oxide
Tempo Red Oxide sandable primers are recommended for above water line use.
  • Fast drying
  • Bonds to bare metal, steel, iron, fiberglass, composite and wood surfaces
  • Fights rust
  • Fills and levels hairline cracks
  • Lacquer primer

Tempo - 800 Cold Galvanizing Zinc Spray
Tempo cold galvanizing zinc coating fuses to metal surfaces to provide exceptional protection against corrosion and rust.
  • Ideal for welded areas
  • Fast drying touch-up for trailers, wheels, anchors, galvanized surfaces
  • 91 percent pure zinc formula
  • Excellent solvent and abrasion resistance

Tempo - 801 Zinc Phosphate Primer - Yellow
Tempo Yellow zinc phosphate primers have a unique chemical etching formulation.
  • Application requires a light dust coat only
  • Consumer formula
  • Recommended for below waterline use
TEM015802 802 Zinc Phosphate Primer - Green

Tempo - 1258 Motor Color Lacquer - Phantom Black Spray
Tempo Phantom Black Motor Color Lacquer spreay is made from the finest acrylic lacquer resin.
  • Dries fast
  • Precise color match
  • Excellent solvent, gasoline and wear resistance
  • Ideal for entire outboard or stern drive
  • Unique vanspray valve provides wide even spray.
TEM020425 6401 Motor Color Lacquer - White (1966-84)
TEM020436 6930 Motor Color Lacquer - Aquamatic White (1972-79)
TEM020469 6969 Motor Color Lacquer - Metallic Blue Silver (1984+)
TEM020484 6984 Motor Color Lacquer - Silver Metallic
TEM020516 7003 Motor Color Lacquer - Dark Blue Metallic

Tempo - 5606 Zinc Chromate Primer - Yellow
Tempo zinc primers have a unique chemical etching formulation.
  • Application requires a light dust coat only
  • Consumer formula
  • Recommended for below waterline use
TEM020421 5605 Zinc Chromate Primer - Green

Tempo - 6995 Clear Coat Lacquer
Tempo clear depth coat lacquer will enhance the color and depth of all lacquer painted surfaces.
  • Specifically formulated with UV inhibitors
  • Will increase luster and depth
  • Protects against harsh elements
  • Renews older finishes
  • Reapplicate any time
Page 1  
 
2006 © REDDEN MARINE SUPPLY
:: another Blu Sky Web Solutions design ::